Invicta® Nelson Two Sided Glass 36" Cast Iron Wood Burning Stove Fireplace- Double sided see through Wood Stove
Invicta® Nelson Two Sided Glass 36" Cast Iron Wood Burning Stove Fireplace- Double sided see through Wood Stove
Couldn't load pickup availability
Invicta Nelson 36" Cast Iron Stoves See through double glass fireplace
The two glass sides of our Nelson stove give a unique character to your home. Cozy evenings await while enjoying the see through design. Settle in on either side of the stove, and listen to the unmistakable sound of the crackling fire as you watch the flames dance.
Unit has two doors. Ideal for separating two rooms to reload the wood from one side to another.
The unit operates with regular loading of small quantities of wood. This operating method is particularly high-performing and respectful of the environment.
This See Through glass fireplace brings a post modern style with a function that people love. Seeing through your fireplace opens up the room or in some cases people will use this fireplace in a wall that separates rooms.
Features
OPTIMAL POWER
|
12 kW |
POWER MODULATION
|
8 to 18 kW |
HEAT VOLUME
|
160 - 360 m³ |
HEATING SURFACE
|
65 to 145 m² |
EFFICIENCY
|
70 % |
CO RATE
|
0.15 % |
CONCENTRATION OF POWDERS
|
82 mg/Nm³ |
PERFORMANCE INDEX
|
1,2 |
COMBUSTILE
|
Logs 25, Logs 33, Logs 50 cm |
MAXIMUM LENGTH OF THE LOGS (HORIZONTALLY)
|
30 in |
LOAD
|
Two front sides |
SMOKE EXHAUST
|
Top |
DIAMETER OF NOZZLE
|
180 mm |
DIMENSIONS
|
H 610 x W 910 x D 480 mm (24 x 35.8 x 18.9 in.) |
Clearance to Combustibles | 48" / 23" / 48" |
Glass Dimensions | 356mm x 763mm x 4mm |
WEIGHT
|
201 kg |
DESIGN
|
Contemporary |
MATTER
|
Cast Iron |
COMPLETION
|
Anthracite |
CERTIFICATION
|
EN 13240 |
GUARANTEE
|
5 years |
Wall Clearances
Installation Questions?
PDF for Invticta Aaron and Nelson
Here is the new Owners Manual
And
Installation Manual for Invicta Aaron and Nelson
Spacing needed from combustibles -23" side to side
Spacing from non combustibles - There’s no restriction for non-combustible wall, but a sheet of cement board fixed to wood stud is not consider as non-combustible wall. For that, they need to check with the local code because it’s different in each state. The Hearth is required - 16" front and rear and 8" on each side
Hearth size requirements
Chimney Height Requirements: At least 3 feet (0.9 m) higher than the highest part of the roof opening through which it passes. • At least 2 feet (0.6 m) higher than any part of the roof within 10 feet (3 m) measured horizontally from the top of the chimney. The recommended minimum chimney height is 15 feet (4.5 m) off the floor. The recommended maximum chimney height is 45 feet (13.5m). This Invicta series requires a draft between 0.06” and 0.1” water column. Ensure your chimney is long enough to provide the minimum draft, and use a damper if your installation has a required chimney height that provides too much draft.
Invicta is the best example of balance between history, craft and European design. It’s also Europe’s largest manufacturer of cast iron stoves, fireplaces and insert.
The Invicta foundry is located in Donchery since 1924, in the Champagne-Ardenne region of France, and is one of the oldest and largest working foundries in Europe.
8 hour extended burning
The unit can operate in slow combustion mode for 8 hours without adding more fuel or other external intervention. There will be a bed of embers after this period. This is enough to reload the unit with fuel to relight it.
Adjustable secondary air
Secondary air protects the glass against smoke and soot deposits. It ensures combustion of volatile materials. The adjustable secondary air flow can adapt the unit’s operation to high draft conditions.
Clean glass
The clean glass system slows deposit buildup on the glass. An air supply above the glass creates a protective curtain. The preheated air is propelled along the glass. It triggers combustion of gas and volatile materials, thereby protecting the glass against smoke and soot deposits.
Origine France Garantie (Made in France Guarantee)
The Origine France Garantie is the only certification that certifies a product was manufactured in France. This labeling is validated by an independent organization, after an audit. (Bureau Veritas No.7208672). OFG products are manufactured in France at Invicta Group manufacturing sites.
Post-combustion system
Injection of pre-heated air into the combustion chamber The supplementary air intake in the back enables hydrocarbons to be destroyed at a high temperature. Complete combustion reduces pollution.
A 8" Flue Adapter is a common add on for this fireplace as well
Invicta, French foundry and enamel plant is implanted since 1924 at Donchery in the region Champagne-Ardenne. With 280 employees, these stoves are truly hand made.
Do you own a Nelson and maybe have low flow? these are some common things that cause the Aaron or Nelson to not burn to their full potential. Most of the time we had issue, customer either:
- Reduce the flue pipe or the chimney to 6’’
- Not enough chimney height (recommended 15’ from bottom of stove)
- Door get closed to fast
- And most of the time, wood too damp
Share
























